CMM Fixture System (540mm Dock with Starter Clamp Kit)
- (1) 50 x 540mm Docking Rail
- (1) 180 x 180mm Plate
- (1) 180 x 360mm Plate
- (1) 180 x 180mm Angle Plate
- (1) Qualifying Bar Plate*
- (1) TR-KIT-03M Starter Work Holding Kit
* Ships with M8 threaded insert. Please note whether you require M6, M10, or M12 sized insert so we can adjust your order.
5-Pc. Loc-N-Load™ Metric fixture system (540mm Rail) PLUS TR-Kit-03M Starter Kit (62 pcs)
The 540mm Docking Rail fits most mid-sized CMMs. Use to create multiple fast-swap setups per CMM! All Loc-N-Load™ fixture plates, rails, and clamps are designed to be built like puzzle pieces in a magnetically interlocking style. The 58-pc Work Holding Kit provides everything you need to inspect virtually any part. Add one kit per CMM to create redundancy in your Quality Department. System and additional pieces can be purchased as needed and shipped same day! Plates have a 20 x 20mm hole pattern.
Bundle includes: (1) Loc-N-Load™ 540mm Docking Rail; (1) 180 x 180mm Plate; (1) 180 x 360mm Plate;, (1) Angle Plate, (1) Qualifying Ball Plate*, PLUS TR-KIT-03 Starter Work holding kit containing non-marring hold downs, v-blocks, stops, and stand-offs.
* Qualifying Ball Plate ships with M8 threaded insert. M6 and M10 inserts are available if needed. For Qualifying Ball Plates with M12 female threads, no insert is required.
STARTER Kit (METRIC) includes:
- (2) Cross-Bow™
- (2) D-Blocks™
- (2) Trigger-Finger™
- (2) Lever Clamps 2.5″ (shafts included)
- (2) V-Block 1 set
- (8) Silver-Bullet™, 4 each – 1″ and 3″
- (2) Steel shaft / stand-off; stackable
- (2) Hole Adjusters
- (4) Simple-Stops™ – 2 each #01, #07
- (13) Stand-offs, assorted sizes
- (21) Hex Keys, plus assorted screws
|Dimensions||31 × 19 × 4.5 in|
Customers also viewed
CMM Fixture System (360mm Dock with Starter Clamp Kit)$2,379.00SKU: SYSM1_DK360TR03Add to cart
CMM Fixture System (720mm Dock with Complete Clamp Kit)$3,779.00SKU: SYSM3_DK720TR02Add to cart
Qualifying Ball Plate$270.00SKU: LNL-QUAL-PLT-MAdd to cart