CMM Fixture System (30″ Dock with WORKS Clamp Kit)

SKU: SYS20_DK30TR01

$4,399.00

Bundle includes:

  • (1) LNL-Dock-30, 30″ docking rail
  • (1) LNL-PLT-0606, 6×6″ Loc-N-Load plate
  • (1) LNL-PLT-0612, 6×12″ Loc-N-Load plate
  • (1) LNL-PLT-1212, 12×12″ Loc-N-Load plate
  • (1) LNL-ANGL-0306, 6″ Angle Plate / Stop
  • (1) LNL-QUAL-PLT,  6 x 4″ Qualifying Ball Plate*
  • Plus – (1) TR-KIT-01  Inspection Arsenal® “WORKS” Work Holding Kit

* Ships with M8 threaded insert. Please note whether you require M6, M10, or M12 sized insert so we can adjust your order.

Affordable enough to add to each CMM.

Description

6-Pc. Loc-N-Load™ fixture plate system (30″ Rail) PLUS the ‘WORKS’ Work Holding Kit (158 pcs)

The largest of rails, the 30″ Docking Rail fits most mid-sized CMMs. For larger and gantry-style CMMs add more than one rail and a variety of fixture plates. All Loc-N-Load™ fixture plates, rails, and clamps are designed to be built like puzzle pieces in a magnetically interlocking style. The ‘WORKS’ Work Holding Kit provides everything you need to inspect virtually any part. Add one kit per CMM to create redundancy in your Quality Department. They can be purchased as needed and shipped same day!

Bundle includes: (1) Loc-N-Load™ 30” Docking Rail, (1) 6×6” Loc-N-Load™ Plate, (1) 6×12” Loc-N-Load™ Plate, (1) 12×12” Loc-N-Load™ Plate, (1) LNL-ANGL-0306, 6″ Angle Plate / Stop, (1) LNL-QUAL-PLT,  6 x 4″ Qualifying Ball Plate*; plus TR-KIT-01 Inspection Arsenal® Work Holding Kit.

* Qualifying Ball Plate ships with M8 threaded insert. M6 and M10 inserts are available if needed. For Qualifying Ball Plates with M12 female threads, no insert is required.

WORKS Kit includes: 

  • (4 ea.) Cross-Bow™ and D-Block clamps
  • (2) Trigger-Block™ clamps
  • (2) Trigger-Finger™ hold-downs with (4) 3” steel shafts
  • (4 ea.) 1, 2, and 3” Silver-Bullet™ stand-offs
  • (7)  Simple-Stop™ rails and stops
  • (2) Spring-Loc™ clamps
  • (2) Sliding Stop™ stops
  • (2) Hole Adjusters
  • (2) V-Blocks
  • (34) Stand-off & Rest Pad set
  • (18) Magnetic Riser Set
  • (2 ea.) sturdy lever clamps 1.5″, 2.5″ and 3.5″ (shafts included)
  • Hex key, thumb and button-head screws.

For larger and gantry-style CMMs add more than one rail and a variety of fixture plates.  All Loc-N-Load™ fixture plates, rails, and clamps are designed to be built like puzzle pieces in a magnetically interlocking style. They can be purchased as needed and shipped same day!

Additional information

Weight 28 lbs
Dimensions 33 × 17 × 4 in
X