CMM Fixture System (30″ Dock with Starter Clamp Kit)
- (1) LNL-Dock-30, 30″ docking rail
- (1) LNL-PLT-0606, 6×6″ Loc-N-Load plate
- (1) LNL-PLT-0612, 6×12″ Loc-N-Load plate
- (1) LNL-PLT-1212, 12×12″ Loc-N-Load plate
- (1) LNL-ANGL-0306, 6″ Angle Plate / Stop
- (1) LNL-QUAL-PLT, 6 x 4″ Qualifying Ball Plate*
- (1) TR-KIT-03 Starter Work Holding Kit
* Ships with M8 threaded insert. Please note whether you require M6, M10, or M12 sized insert so we can adjust your order.
Affordable enough to add to each CMM.
6-Pc. Loc-N-Load™ fixture system (30″ Rail) PLUS TR-Kit-03 Starter Kit (62 pcs)
The largest 30″ Docking Rail fits most mid-sized CMMs. For larger and gantry-style CMMs add more than one rail and a variety of fixture plates. All Loc-N-Load™ fixture plates, rails, and clamps are designed to be built like puzzle pieces in an interlocking style. Plates interlock magnetically to remain firmly secured to one another. They can be purchased as needed and shipped same day!
Bundle Includes: (1) LNL-Dock-30, 30″ docking rail; (1) LNL-PLT-0606, 6×6″ Loc-N-Load plate; (1) LNL-PLT-0612, 6×12″ Loc-N-Load plate; (1) LNL-PLT-1212, 12×12″ Loc-N-Load plate; (1) LNL-ANGL-0306, 6″ Angle Plate / Stop; (1) LNL-QUAL-PLT, 6 x 4″ Qualifying Ball Plate*; PLUS TR-KIT-03 Starter Work Holding kit containing non-marring hold downs, v-blocks, stops, and stand-offs.
* Qualifying Ball Plate ships with M8 threaded insert. M6 and M10 inserts are available if needed. For Qualifying Ball Plates with M12 female threads, no insert is required.
Starter Kit includes:
- (2) Cross-Bow™
- (2) D-Blocks™
- (2) Trigger-Finger™
- (2) Lever Clamps 2.5″ (shafts included)
- (2) V-Block 1 set
- (8) Silver-Bullet™, 4 each – 1″ and 3″
- (2) Steel shaft / stand-off; stackable
- (2) Hole Adjusters
- (4) Simple-Stops™ – 2 each #01, #07
- (13) Stand-offs, assorted sizes
- (21) Hex Keys, plus assorted screws
|Dimensions||33 × 15 × 2 in|