CMM Fixture System (30″ with Complete Clamp Kit)

$2,298.00

30″ BUNDLED CMM Fixture Plate System (30″ Rail) PLUS  Complete Work Holding Kit.
(SYS20_DK30TR02)

Bundle includes:
(1) LNL-Dock-30, 30″ docking rail,
(1) LNL-PLT-0606, 6 x 6″ Loc-N-Load ™ plate,
(1) LNL-PLT-0612, 6 x 12″ Loc-N-Load ™ plate,
(1) LNL-PLT-1212, 12 x 12″ Loc-N-Load ™ plate,
(1) LNL-ANGL-0306, 6″ Angle Plate / Stop,
(1) LNL-QUAL-PLT,  6 x 4″ Indicator Ball Plate,
PLUS
(1) TR-KIT-02 Inspection Arsenal™ 69+ pc work holding Complete Kit containing non-marring hold downs, v-blocks, stops and stand-offs.

Affordable enough to add to each CMM.

Description

6-Pc. Loc-N-Load™ fixture plate system (30″ Rail) PLUS Complete Work Holding Kit

The largest of rails, the 30″ Docking Rail fits most mid-sized CMMs. For larger and gantry-style CMMs add more than one rail and a variety of fixture plates.  All Loc-N-Load™ fixture plates, rails, and clamps are designed to be built like puzzle pieces in a magnetically interlocking style.
The Complete Work Holding Kit provides everything you need to inspect virtually any part. Add one kit per CMM to create redundancy in your Quality Department.

They can be purchased as needed and shipped same day!

Bundle includes:
(1) Loc-N-Load™ 30” Docking Rail; (1) 6×6” Loc-N-Load™ Plate; (1) 6×12” Loc-N-Load™ Plate; (1) 12×12” Loc-N-Load™ Plate; (1) LNL-ANGL-0306, 6″ Angle Plate / Stop; (1) LNL-QUAL-PLT,  6 x 4″ Indicator Ball Plate; Plus TR-KIT-02, Inspection Arsenal™ 69+ piece Complete-Kit

Complete Kit includes: (4 ea.) Cross-Bow™ and D-Block clamps; (2 ea.) Trigger-Block™ clamps and V-Block stand-offs; (2) Trigger-Finger™ hold-downs with (4) 3” steel shafts, (4 ea. ) 1, 2, and 3” Silver-Bullet™ stand-offs, (2 ea.) -07 and -02 Simple-Stop™ rails and stops; plus hex key, thumb and button-head screws.

Additional information

Weight 22 lbs
Dimensions 33 × 17 × 4 in