CMM Fixture System (18″ Dock with Complete Clamp Kit)
- (1) LNL-Dock-18, 18″ docking rail
- (1) LNL-PLT-0606, 6×6″ Loc-N-Load plate
- (1) LNL-PLT-0612, 6×12″ Loc-N-Load plate
- (1) LNL-ANGL-0306, 6″ Angle Plate / Stop
- (1) LNL-QUAL-PLT, 6 x 4″ Qualifying Ball Plate*
- PLUS – (1) TR-KIT-02 Inspection Arsenal® Complete Work Holding Kit
* Ships with M8 threaded insert. Please note whether you require M6, M10, or M12 sized insert so we can adjust your order.
Affordable enough to add to each CMM.
5-Pc. CMM Fixture Plate System (18″ Rail) PLUS Complete Clamp Kit (82 pcs)
For larger and gantry-style CMMs add more than one rail and a variety of fixture plates. Use to create multiple fast-swap setups per CMM! All Loc-N-Load™ fixture plates, rails, and clamps are designed to be built like puzzle pieces in a magnetically interlocking style. The Complete Clamp Kit provides everything you need to inspect virtually any part. Add one Bundle per CMM to create redundancy in your Quality Department. Bundle System and additional pieces can be purchased as needed and shipped same day!
Bundle Includes: (1) LNL-Dock-18, 18″ docking rail; (1) LNL-PLT-0606, 6×6″ Loc-N-Load plate; (1) LNL-PLT-0612, 6×12″ Loc-N-Load plate; (1) LNL-ANGL-0306, 6″ Angle Plate / Stop; (1) LNL-QUAL-PLT, 6 x 4″ Qualifying Ball Plate*; Plus TR-KIT-02, Inspection Arsenal® Complete Kit
* Qualifying Ball Plate ships with M8 threaded insert. M6 and M10 inserts are available if needed. For Qualifying Ball Plates with M12 female threads, no insert is required.
Complete Kit includes:
- (4 ea.) Cross-Bow™
- (4 ea.) D-Block clamps
- (2 ea.) Trigger-Block™ clamps
- (2) Trigger-Finger™ hold-downs with (4) 3” steel shafts
- (4 ea. ) 1, 2, and 3” Silver-Bullet™ stand-offs
- (7) Simple-Stop™ rails and stops
- (2) Spring-Loc™ clamps
- (2) Sliding Stop™ stops
- (2) Hole Adjusters
- (2 ea.) V-Block
- (2 ea.) sturdy lever clamps 1.5″, 2.5″ and 3.5″ (shafts included)
- Hex key, thumb and button-head screws
|Dimensions||31 × 15 × 2 in|